A solution for systems under pressure? Overflow Valve!
Within a pipeline system under pressure, different volume flow rates are a common problem. They can harm or even destroy the system. Mostly, the cause lies in the late or non-existing control over the media, for example a pump, which causes the pressure. As a result, the pump continues to build up pressure even when the pressure is already too high. This results in damage to the pump, or even in an explosion that destroys the entire system and might harm people and can cause tremendous amount of loss. Overflow valves from NieRuf industrial valves are the solution to this problem.
angle-type overflow valve 3/8" inch fm type UV02 made of gunmetal/brass pressure range 2 - 12 bar seal PTFE for liquid and gaseous media
diameter:
3/8" inch fm
connection:
female thread BSP-P
seal:
PTFE
material:
gunmetal/brass
range of adjustment:
2 - 12 bar
angle-type overflow valve 3/4" inch fm type UV02 made of gunmetal/brass pressure range 2 - 12 bar seal PTFE for liquid and gaseous media
diameter:
3/4" inch fm
connection:
female thread BSP-P
seal:
PTFE
material:
gunmetal/brass
range of adjustment:
2 - 12 bar
angle-type overflow valve 1/2" inch fm type UV01 made of gunmetal/brass pressure range 2 - 12 bar seal FKM for liquid and gaseous media
diameter:
1/2" inch fm
connection:
female thread BSP-P
seal:
FKM
material:
gunmetal/brass
range of adjustment:
2 - 12 bar