The ball valve - an easy and fast tool to control a system

Just like butterfly valves, ball valves belong to the category of shut-off valves. Whenever there is the need to control or cut of a gas, a fluid or any other medium, there is a demand for ball-valves. However, the requirement to the ball-valve may vary strongly. Depending on the application, ball valves with DVGW approval for gas, biogas or drinking water may be required. In some cases the fittings have to fulfill TA Air guidelines or the Fire Safe criteria. Whatever you need a ball-valve for, NieRuf industry fittings will help you find a solution.

Filter

Product configurator

Gas ball valve stainless steel DN40 - 1 1/2" inch full port design seal made of PTFE / Viton for gas DVGW-Gas

diameter:

DN40 - 1 1/2" inch

connection:

female thread

media:

gas DVGW-Gas

body material:

stainless steel 1.4408

actuator:

lever handle made of stainless steel with yellow plastic cover

€61.60*

€67.47 VAT included.

Delivery time: in stock

Express delivery:

ball valve made of stainless steel DN20 - 3/4" inch reduced port design seal made of PTFE for liquid and gaseous media

diameter:

DN20 - 3/4" inch

connection:

female thread

media:

liquid and gaseous media

body material:

stainless steel 1.4408

actuator:

lever handle made of stainless steel with plastic cover and locking device

€10.60*

€12.61 VAT included.

Delivery time: in stock

Express delivery:

3 way ball valve DN10 - 3/8" inch T drilling seal made of PTFE in stainless steel for liquid and gaseous media

diameter:

DN10 - 3/8" inch

connection:

female thread

media:

liquid and gaseous media

body material:

stainless steel 1.4408

actuator:

hand lever made of stainless steel with locking device

NieRuf-Exchange
€45.80*

€54.50 VAT included.

Delivery time: in stock

Express delivery:

ball valve made of stainless steel DN25 - 1" inch reduced port design seal made of PTFE for liquid and gaseous media

diameter:

DN25 - 1" inch

connection:

female thread

media:

liquid and gaseous media

body material:

stainless steel 1.4408

actuator:

lever handle made of stainless steel with plastic cover and locking device

€16.10*

€19.16 VAT included.

Delivery time: in stock

Express delivery:

ball valve made of stainless steel DN15 - 1/2" inch reduced port design seal made of PTFE for liquid and gaseous media

diameter:

DN15 - 1/2" inch

connection:

female thread

media:

liquid and gaseous media

body material:

stainless steel 1.4408

actuator:

lever handle made of stainless steel with plastic cover and locking device

€7.90*

€9.40 VAT included.

Delivery time: in stock

Express delivery:

2 way ball valve DN25 - 1" inch full port design seal made of PTFE for liquid and gaseous media

diameter:

DN25 - 1" inch

connection:

female thread

media:

liquid and gaseous media

body material:

brass nickel plated (CW617N)

actuator:

lever handle made of steel zinc coated with red plastic cover

€14.10*

€16.78 VAT included.

Delivery time: in stock

Express delivery:

automatic ball valves DN40 - 1 1/2" inch brass CW617N nickel plated PK01 pneumatic actuator DAE63 made of aluminium (mode of function: DAE = single acting)

diameter:

DN40 - 1 1/2" inch

connection:

female thread

media:

liquid and gaseous media

body material:

brass CW617N nickel plated

actuator:

pneumatic actuator DAE63 made of aluminium (mode of function: DAE = single acting)

€277.90*

€330.70 VAT included.

Delivery time: in stock

Express delivery:

three-pieces 2-way ball valve made of stainless steel 1.4408 DN15 - 1/2" inch female thread for liquid and gaseous media

diameter:

DN15 - 1/2" inch

connection:

female thread BSP

media:

liquid and gaseous media

body material:

stainless steel 1.4408

actuator:

hand lever with red plastic cover

€14.90*

€17.73 VAT included.

Delivery time: in stock

Express delivery:

Selection of the right ball-valve for everyone

The areas of application for ball valves are multifaceted. Ball valves are used for a wide range of applications. We are able to deliver our low-priced ball valves with electrical part-turn actuator or flange ball valves with a pneumatic actuator quickly. Regardless of whether you need a ball valve with L-bore, T-bore or with a full or reduced bore, we offer a huge selection of high-quality ball valves. We deliver ball-valves with the following nominal sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN150, DN200, DN250 with sleeve connection, 1/4", 3/8“, 1/2“, 3/4“, 1“, 1 ¼“, 1 ½“, 2“, 2 1/2", 3", 4" inches with female or male thread off the shelf. Depending on the medium, we deliver fittings made from brass, stainless steel or cast iron.

The perfectly fitting ball valve for your needs:

If you need any help finding the right ball-valves solution, the NieRuf industry fittings team will be pleased to help you with its expertise - fast and for free. We will help you find the appropriate ball valve from our wide range of goods. NieRuf delivers 2-way ball valves, 3-way ball valves, high pressure ball valves and multiple way ball valves rapidly and cost-efficiently. Furthermore, we are able to produce ball valves with full or reduced bore. We would be pleased to offer you any customized ball valve according to your personal needs. Please feel free to order the ball-valve that suits your demand for a low price at our online shop.


FAQ

There for you


Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.

You can reach us from Monday to Friday at +497143 9666900 and any time at info@nieruf.de

Catalog

Quality


Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.

This is NieRuf


Committed

Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.

Motivated

We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.

Competently

Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.

Flexible

We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.

Call NieRuf GmbH

Need help?

If you have any questions, we are available by phone from Monday to Friday from 8:30 a.m. to 5:00 p.m.

Fax order: 07143 / 96669 - 01

07143 / 96669 - 00