High quality non-return valves in DISCO design for high-pressure application
DISCO check valves are a special form of non-return valve. The special property lies in the construction of the valve, the design differs greatly from the check-valve. The disc of the valve is pressed against the inside of the casing by a ring-shaped spring, thus reliably closing the pipe system against reflux. If the pressure comes from the front, the dished plate inside the casing opens and allows the liquid or gas medium to flow. Because of the spring, it can be installed in any position, the short installation length is also an advantage. Frequently, the Disco valves are used in water pipes, industrial plants, in mining, shipbuilding, the chemical industry, in heating and other hot water plants.
DISCO - Check valve DN 65 made of stainless steel CF8M seal EPDM for liquid and gaseous media PN 63 - 100 (+ASME B16.5 ANSI 600 and 900) DIN EN 1092-1 B1
diameter:
DN 65
design:
disco check valve
seal:
EPDM
body material:
Stainless steel CF8M
pressure range:
0 - 160 bar
DISCO - Check valve DN 40 made of stainless steel CF8M seal PTFE for liquid and gaseous media PN 63 - 100 (+ASME B16.5 ANSI 600 and 900) DIN EN 1092-1 B1
diameter:
DN 40
design:
disco check valve
seal:
PTFE
body material:
Stainless steel CF8M
pressure range:
0 - 160 bar
DISCO - Check valve DN 20 made of stainless steel CF8M seal EPDM for liquid and gaseous media PN 63 - 100 (+ASME B16.5 ANSI 600 and 900) DIN EN 1092-1 B1
diameter:
DN 20
design:
disco check valve
seal:
EPDM
body material:
Stainless steel CF8M
pressure range:
0 - 160 bar