Brass solenoid valves for industrial applications!
The brass solenoid valves from NieRuf are particularly suitable for water applications and water treatment plants, e.g. in industry. But they are also used lots in machine and plant construction. Because of the large number or possible applications, there is also a large number of different valves. In the voltage area, we are able to offer valves in with 24V, 110V or 230 V. These valves have an internal thread and are available in the nominal widths 1/8" - 2" inches. Depending on the desired switching function, these are available as NO (normal open) or NC (normal closed). Some of the valves have ATEX approval. In addition, depending on the model these are directly controlled, forced controlled or servo-controlled.
2/2 Ways Solenoid valve G 3/4" Inch DN20 made of brass seal EPDM force pilot operated nominal voltage 24V DC pressure 0.0 - 8 bar
diameter:
DN20
control:
force pilot operated
voltage:
24V DC
max. pressure:
0.0 - 8 bar
function:
NC - normally closed
Solenoid valve G 1/2" Inch DN 8.0 made of brass seal EPDM servo controlled nominal voltage 230V 50Hz pressure 0.1 - 16 bar
diameter:
DN 8.0
control:
servo controlled
voltage:
230V 50Hz
max. pressure:
0.1 - 16 bar
function:
NC - normally closed
2/2 Ways Solenoid valve G 1/2" Inch DN10 made of brass seal FKM force pilot operated nominal voltage 24V DC pressure 0.0 - 16 bar
diameter:
DN10
control:
force pilot operated
voltage:
24V DC
max. pressure:
0.0 - 16 bar
function:
NC - normally closed
2/2 Ways Solenoid valve G 1/2" Inch DN10 made of brass seal EPDM force pilot operated nominal voltage 230V 50Hz pressure 0.0 - 20 bar
diameter:
DN10
control:
force pilot operated
voltage:
230V 50Hz
max. pressure:
0.0 - 20 bar
function:
NC - normally closed