Cross fitting stainless steel, brass or PVC-U | NieRuf

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

cross

Cross made from stainless steel 316, brass or PVC-U

A cross is used in pipe systems as a connecting element. It has four inlets and outlets, which are fastened to pipes using a thread or adhesive sleeve. There should be a cotton strap or Teflon tape as insulating material between the thread of the pipe and that of the crosspiece. The crosses are often used if an installation line is to be divided into three additional lines. In addition, fittings such as PVC ball valves, stainless steel ball valves or even accessories such as siphons can be fastened directly to the inner thread or adhesive sleeve. Crosses from NieRuf comprise high quality stainless steel 316 and are available in the nominal widths 1/8" - 4" inches. They are also available in high quality plastic PVC-U with adhesive sleeve in the nominal widths d20 - d63. The inlets and outlets are arranged at a 90° angle. As a result of the stainless steel or PVC, the crosses can be installed by NieRuf in a large number of applications. Frequently they are used in industry and trades. They are used in heating systems, in the chemical industry and in biogas plants.

Cross made from stainless steel 316, brass or PVC-U

A cross is used in pipe systems as a connecting element. It has four inlets and outlets, which are fastened to pipes using a thread or adhesive sleeve. There should be a cotton strap or Teflon tape as insulating material between the thread of the pipe and that of the crosspiece. The crosses are often used if an installation line is to be divided into three additional lines. In addition, fittings such as PVC ball valves, stainless steel ball valves or even accessories such as siphons can be fastened directly to the inner thread or adhesive sleeve. Crosses from NieRuf comprise high quality stainless steel 316 and are available in the nominal widths 1/8" - 4" inches. They are also available in high quality plastic PVC-U with adhesive sleeve in the nominal widths d20 - d63. The inlets and outlets are arranged at a 90° angle. As a result of the stainless steel or PVC, the crosses can be installed by NieRuf in a large number of applications. Frequently they are used in industry and trades. They are used in heating systems, in the chemical industry and in biogas plants.

cross 1/4" inch stainless steel 316 90° angle FM

cross GF01-1 female thread 1/4" inch made of stainless steel 316 90° angle for liquid and gaseous media

Technical features

diameter DN8 - 1/4" inch
connection female thread
material stainless steel 316
design 90° angle
thread acc. to DIN EN 10226-1

cross 3/8" inch stainless steel 316 90° angle FM

cross GF01-1 female thread 3/8" inch made of stainless steel 316 90° angle for liquid and gaseous media

Technical features

diameter DN10 - 3/8" inch
connection female thread
material stainless steel 316
design 90° angle
thread acc. to DIN EN 10226-1

cross 1/8" inch stainless steel 316 90° angle FM

cross GF01-1 female thread 1/8" inch made of stainless steel 316 90° angle for liquid and gaseous media

Technical features

diameter DN6 - 1/8" inch
connection female thread
material stainless steel 316
design 90° angle
thread acc. to DIN EN 10226-1

cross d 40 PVC-U 90° angle adhesive connection

cross GF03-1 adhesive connection d 40 made of PVC-U 90° angle for liquid and gaseous media

Technical features

diameter d 40
connection adhesive connection
material PVC-U
design 90° angle

cross 1 1/4" inch stainless steel 316 90° angle FM

cross GF01-1 female thread 1 1/4" inch made of stainless steel 316 90° angle for liquid and gaseous media

Technical features

diameter DN32 - 1 1/4" inch
connection female thread
material stainless steel 316
design 90° angle
thread acc. to DIN EN 10226-1

cross d 50 PVC-U 90° angle adhesive connection

cross GF03-1 adhesive connection d 50 made of PVC-U 90° angle for liquid and gaseous media

Technical features

diameter d 50
connection adhesive connection
material PVC-U
design 90° angle

cross d 63 PVC-U 90° angle adhesive connection

cross GF03-1 adhesive connection d 63 made of PVC-U 90° angle for liquid and gaseous media

Technical features

diameter d 63
connection adhesive connection
material PVC-U
design 90° angle

cross d 32 PVC-U 90° angle adhesive connection

cross GF03-1 adhesive connection d 32 made of PVC-U 90° angle for liquid and gaseous media

Technical features

diameter d 32
connection adhesive connection
material PVC-U
design 90° angle

1 of

3

Items per page

We are here for you

FAQ

nieruf.theme.component.advantages.col-2.alt

Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.

Consultation

Mon. - Fri. from 08:30 - 17:00
Phone: +49 7143/9666-900
sales@nieruf.com

FAQ
FREQUENTLY ASKED QUESTIONS

Brand promise

Committed

Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.

Motivated

We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.

Competently

Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.

Flexible

We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.

Contact

Contact

Do you need help?

For all questions we are available by phone

Mo - Fr 08:30 - 17:00

+49 7143/9666-900

or send us an e-mail:

sales@nieruf.com

Resistance check

Frequently asked questions

Need help?

If you have any questions, we are available by phone from Monday to Friday from 8:30 a.m. to 5:00 p.m.

order via mail:

07143 / 96669 - 00

sales@nieruf.com