NieRuf: your experienced safety valve partner!
Safety valves are essential in pipeline construction as well as in other closed construction systems such as biogas plants and industrial facilities. They are not only mandatory by law, but also lifesaving safety devices. They are used to prevent overpressure that can result in environmentally harmful gases and fluids. If you want to make sure that your facility is protected against overpressure, you will need to work with safety valves. NieRuf is an expert in that market segment and therefore a competent specialist for those who wish to install safety valves. No matter which nominal size, seal variety or connection variety you need to install, we will have the matching product in stock. Please do not hesitate to talk to us. We would love to advise you on our valve models.
Determination of
The set pressure of a safety valve
Determination of
Max. Operating pressure of a plant
angle-type-safety-valve for liquid and gaseous media with with lever 1" x 1 1/2" fm Typ SV03 with Female screw threaded BSP-P PTFE-seal made of gunmetal without bellows
diameter:
1" x 1 1/2" fm
connection:
Female screw threaded BSP-P
seal:
PTFE
set pressure:
0,5 - 50,0 bar
media:
neutral liquid media
safety valve for liquid media NBR 1/2" x 1" fm gunmetal Typ SV04 with Female screw threaded BSP-P with lever and with bellows
diameter:
1/2" x 1" fm
connection:
Female screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
angle-type-safety-valve for liquid and gaseous media stainless steel 1 1/2" m x 2" fm male thread NBR Typ SV05 with twist-type lifting mechanism
diameter:
1 1/2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
neutral liquid media
angle-type-safety valve with with bellows for liquid media stainless steel 3/4" m x 1 1/4" fm Typ SV06 with male screw threaded BSP-P FKM-seal and twist-type lifting mechanism
diameter:
3/4" m x 1 1/4" fm
connection:
male screw threaded BSP-P
seal:
FKM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
safety valve with with bellows 2" m x 2" fm stainless steel Typ SV06 with male screw threaded BSP-P NBR-seal for liquid media with with lever
diameter:
2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
cast iro flange-safety valve DN40/DN40 open lifting device and open bonnet for gaseous media, made of cast iron EN-JL1040 seal FPM
diameter:
DN40/DN40
connection:
flange acc. to DIN EN 1092-2
seal:
FPM
set pressure:
0,5 up to max. 16 bar
media:
gaseous media
flange-safety valve DN65/DN100 SF04 for liquid and gaseous media made of stainless steel seal metal set pressure 0,2 - 40,0 bar with lifting device lever
diameter:
DN65/DN100
connection:
flange acc. to DIN EN 1092-1
seal:
metal
set pressure:
0,2 - 40,0 bar
media:
liquid and gaseous media
flange-safety valve DN50/DN50 made of cast iron EN-JL1040 seal FPM pressure 0,5 up to max. 16 bar lifting with lever
diameter:
DN50/DN50
connection:
flange acc. to DIN EN 1092-2
seal:
FPM
set pressure:
0,5 up to max. 16 bar
media:
liquid and gaseous media
safety valve 1 1/4" m x 2" fm male screw threaded BSP-P SV08 for gaseous media made of gunmetal seal FKM set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version with lever
diameter:
1 1/4" m x 2" fm
connection:
male screw threaded BSP-P
seal:
FKM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
gaseous media
safety-valve male thread 2" m x 2" fm gunmetal EPDM Typ SV03 for neutral liquid media with twist-type lifting mechanism without bellows
diameter:
2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
EPDM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
neutral liquid media
safety valve 2" male screw threaded BSP-P SV09 for neutral gaseous media made of stainless steel seal FKM set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version
diameter:
2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
FKM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
neutral gaseous media
flange-safety valve DN20/DN20 closed lifting device and closed bonnet made of cast iron EN-JL1040 pressure 0,3 up to max. 16 bar with lever
diameter:
DN20/DN20
connection:
flange acc. to DIN EN 1092-2
seal:
metal
set pressure:
0,3 up to max. 16 bar
media:
liquid and gaseous media
safety-valve for neutral liquid media gunmetal 1" m x 1 1/2" fm male thread NBR Typ SV03 with twist-type lifting mechanism without bellows
diameter:
1" m x 1 1/2" fm
connection:
male screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
neutral liquid media
flange-safety valve DN25/DN25 closed lifting device and closed bonnet made of cast iron EN-JL1040 pressure 0,2 up to max. 16 bar with lever
diameter:
DN25/DN25
connection:
flange acc. to DIN EN 1092-2
seal:
metal
set pressure:
0,2 up to max. 16 bar
media:
liquid and gaseous media
flange-safety valve DN50/DN80 SF06 for liquid and gaseous media made of Spheriodal graphite cast iron 5.1303 seal EPDM set pressure 3,0 - 40,0 bar without lifting device
diameter:
DN50/DN80
connection:
flange acc. to DIN EN 1092-2 | Input PN40 output PN16
seal:
EPDM
set pressure:
3,0 - 40,0 bar
media:
liquid and gaseous media
flange-safety valve DN40/DN40 SF0202 for gaseous media made of cast steel seal metal pressure 0,2 up to max. 40 bar with lever
diameter:
DN40/DN40
connection:
flange acc. to DIN EN 1092-1
seal:
metal
set pressure:
0,2 up to max. 40 bar
media:
gaseous media
safety-valve for liquid media 2" m x 2" fm with with bellows und twist-type lifting mechanism gunmetal Typ SV04 with male screw threaded BSP-P and EPDM-seal
diameter:
2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
EPDM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
safety valve mit einem with bellows 1 1/4" m x 2" fm SV10 for gaseous media made of stainless steel seal NBR set pressure 0,5 - 25,0 bar- higher pressures possible in PTFE version
diameter:
1 1/4" m x 2" fm
connection:
male screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
gaseous media
flange-safety valve DN15/DN25 SF04 for liquid and gaseous media made of stainless steel seal EPDM set pressure 0,2 - 40,0 bar with lifting device lever
diameter:
DN15/DN25
connection:
flange acc. to DIN EN 1092-1
seal:
EPDM
set pressure:
0,2 - 40,0 bar
media:
liquid and gaseous media
flange-safety valve DN20/DN20 SF0202 for gaseous media made of cast steel seal EPDM pressure 0,5 up to max. 40 bar 0°C up to + 150°C
diameter:
DN20/DN20
connection:
flange acc. to DIN EN 1092-1
seal:
EPDM
set pressure:
0,5 up to max. 40 bar
media:
gaseous media
flange-safety valve DN80/DN125 SF04 for liquid and gaseous media made of stainless steel seal PTFE set pressure 0,2 - 40,0 bar without lifting device
diameter:
DN80/DN125
connection:
flange acc. to DIN EN 1092-1
seal:
PTFE
set pressure:
0,2 - 40,0 bar
media:
liquid and gaseous media
angle-type-safety valve with with bellows for liquid media 1 1/2" m x 2" fm stainless steel Typ SV06 with male screw threaded BSP-P NBR-seal and with lever
diameter:
1 1/2" m x 2" fm
connection:
male screw threaded BSP-P
seal:
NBR
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
angle-type-safety valve with with lever und with bellows for liquid media 1 1/4" m x 2" fm Typ SV04 with male screw threaded BSP-P EPDM-seal made of gunmetal
diameter:
1 1/4" m x 2" fm
connection:
male screw threaded BSP-P
seal:
EPDM
set pressure:
0,5 - 25,0 bar- higher pressures possible in PTFE version
media:
liquid media
safety-valve for neutral liquid media stainless steel 3/4" m x 1 1/4" fm PTFE Typ SV05 with male screw threaded BSP-P and with lever
diameter:
3/4" m x 1 1/4" fm
connection:
male screw threaded BSP-P
seal:
PTFE
set pressure:
0,5 - 70,0 bar
media:
neutral liquid media
The right safety valve for every area of application
Steam boiler, pressure or transportation tanks up to gas lines – safety valves are all over. In an emergency case they prevent closed construction systems from overpressure. In terms of safety valves and other auxiliary equipment we are well positioned. This is why we can offer an outstanding and complete selection of products. Each safety valve is EG-type-tested and TUV-certified. Therefore all our safety valves match the DIN EN 4126-1 safety norm. In our online shop you will find a variety of high quality products for compressed air, fluids, fumes and gases. For whatever purpose you need to use a safety valve, we are sure that you will find the appropriate in the multitude of our selection.
Specifications:
connection: | thread: 1/4", 3/8“, 1/2“, 3/4“, 1“, 1 ¼“, 1 ½“, 2" |
pressure range: |
0,2 - 630 bar - depending on design |
material: | stainless steel, steel, brass, gunmetal |
temperature: | -10 degree Celsius to + 400 degree Celsius - depending on design |
Huge variety of safety valves in our store
No matter which specifications like seals, set pressure and temperature are required, we will find exactly the right safety valve for you. In our store you will find valves that are approved for -196 degree Celsius to 400 degree Celsius. Furthermore we deliver approved valves for pressures from as low as 0.2 bar up to 630 bar. We guarantee excellent processing and products of brilliant quality formed from the best materials such as stainless steel, brass, gunmetal, cast-iron and steel. Every safety valve certified by DIN EN 4126-1 is made in the way that it prevents a pressure build-up of maximum 10% in closed construction systems. Please feel free to use our web shop multitude of products to get exactly the matching one for your special area of application.
There for you
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com
Quality
Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.
This is NieRuf
Committed
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
Motivated
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Competently
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
Flexible
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.