Butterfly valve DN 65 Wafer type body made of GGG40 with pneumatic actuator double acting seal FPM industry design
Butterfly valve DN 250 Wafer type body made of GGG40 with pneumatic actuator double acting seal FPM industry design
Butterfly valve DN 65 Lug type body made of GGG40 with pneumatic actuator double acting seal EPDM high temperature & FDA industry design
Butterfly valve DN 65 PN10-PN16 Lug type body made of GGG40 with electric actuator 24-240V AC/DC seal EPDM high temperature & FDA industry design
Butterfly valve DN 50 Lug type body made of GGG40 with pneumatic actuator single acting normally closed seal FPM industry design
Butterfly valve DN 50 Lug type body made of GGG40 with pneumatic actuator double acting seal FPM industry design
Butterfly valve DN 65 PN6-PN10-PN16 & ANSI150 Wafer type body made of GGG40 with electric actuator 24-240V AC/DC seal FPM industry design
Butterfly valve DN 250 Wafer type body made of GGG40 with pneumatic actuator double acting seal NBR-70-black DVGW gas industry design
For maximum flexibility, we offer you our between-flange butterfly valves, also with drives in different variants. The butterfly valve with pneumatic drive (image left) is operated with compressed air. These are available in single-acting or double-acting models. Single-acting drives only have one inlet that is operated by compressed air, which opens the valve. It is then closed by a pre-tensioned spring. Double-acting drives have two inlets, one serves to close the valve and the other to open the valve, depending on which inlet is actuated with compressed air. The pneumatic drive can be operated via a Namur valve . We are able to offer the butterfly valves with electric rotary drive (image right) with voltages 24 Volt AC/DC or 230 Volt AC. The electric drive includes a temperature monitor, which constantly monitors the temperature of the motor. Please note that our automated butterfly valves only up to DN400 are available in the webshop. Butterfly valves with larger nominal widths have to be ordered from us. Our motorised butterfly widths are frequently used in water and drinking water treatment, in shipbuilding, in sewage plants, in various hot water or cold water circuits
Irrespective of the drive technology, our butterfly valves are made from high quality spheroidal graphite cast iron GGG40. Some of the drives are designed with protection class IP67, more information is available in the datasheets.
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
Mon. - Fri. from 08:30 - 17:00
Phone: +49 7143/9666-901
sales@nieruf.com
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.
Contact For all questions we are available by phone
Mo - Fr 08:30 - 17:00
or send us an e-mail:
Resistance check 
Frequently asked questions 
Configurator 
Angle seat valves
Ball valves
Butterfly valves
Check valves
Coaxial valves
Compensators
DISCO check valves
Diaphragm valve
Flow control valve
Gate valves
Globe valves
Knife gate valve
Manometer gauge valve
Needle valves
Overflow valves
Pressure reducing valves
Safety valves
Sight glass
Solenoid valve
Stainless steel hoses
Strainer
Vent-valve
Need help?
If you have any questions, we are available by phone from Monday to Friday from 8:30 a.m. to 5:00 p.m.
order via mail:
