Compensators aus steel (electro galvanized) G 3/4" Inch female thread, sleeve EPDM 16 bar acc. Temperature
diameter:
G 3/4" Inch
connection:
female thread
nominal pressure:
16 bar acc. Temperature
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators made of steel (electro galvanized) DN200, sleeve NBR flange acc. DIN EN 1092-1 PN10
diameter:
DN200
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN10
sleeves:
NBR
material:
steel (electro galvanized)
Compensators aus steel (electro galvanized) G 1 1/2" Inch female thread, sleeve EPDM 16 bar acc. Temperature
diameter:
G 1 1/2" Inch
connection:
female thread
nominal pressure:
16 bar acc. Temperature
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators made of steel (electro galvanized) DN100, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN100
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators DN80 with EPDM-sleeve and steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN80
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
steel (electro galvanized) 235JR
Compensators DN100 with EPDM-sleeve and steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN100
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
steel (electro galvanized) 235JR
Compensators KP04 DN40 with NBR-sleeve and steel flange for liquid media and gases (no steam)
diameter:
DN40
connection:
flange acc. DIN EN 1092-1 PN40
nominal pressure:
PN 16
sleeves:
NBR
material:
steel (electro galvanized) 235JR
Compensators DN200 with EPDM-sleeve and steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN200
connection:
flange acc. DIN EN 1092-1 PN10
nominal pressure:
PN 10
sleeves:
EPDM
material:
steel (electro galvanized) 235JR
Compensators DN40 with EPDM-sleeve and steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN40
connection:
flange acc. DIN EN 1092-1 PN40
nominal pressure:
PN 16
sleeves:
EPDM
material:
steel (electro galvanized) 235JR
Compensators DN200 with NBR-sleeve and stainless steel flange for liquid media and gases (no steam)
diameter:
DN200
connection:
flange acc. DIN EN 1092-1 PN10
nominal pressure:
PN 10
sleeves:
NBR
material:
stainless steel 1.4541
Compensators DN150 with EPDM-sleeve and stainless steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN150
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
stainless steel 1.4541
Compensators made of steel (electro galvanized) DN40, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN40
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators DN50 with NBR-sleeve and stainless steel flange for liquid media and gases (no steam)
diameter:
DN50
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
NBR
material:
stainless steel 1.4541
Compensators DN150 with EPDM-sleeve and steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN150
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
steel (electro galvanized) 235JR
Compensators made of steel (electro galvanized) DN32, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN32
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators DN100 with EPDM-sleeve and stainless steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN100
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
stainless steel 1.4541
Compensators made of steel (electro galvanized) DN125, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN125
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators made of steel (electro galvanized) DN150, sleeve EPDM flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN150
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
EPDM
material:
steel (electro galvanized)
Compensators DN125 with NBR-sleeve and steel flange for liquid media and gases (no steam)
diameter:
DN125
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
NBR
material:
steel (electro galvanized) 235JR
Compensators KP04 DN32 with NBR-sleeve and steel flange for liquid media and gases (no steam)
diameter:
DN32
connection:
flange acc. DIN EN 1092-1 PN40
nominal pressure:
PN 16
sleeves:
NBR
material:
steel (electro galvanized) 235JR
Compensators DN65 with EPDM-sleeve and stainless steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN65
connection:
flange acc. DIN EN 1092-1 PN16
nominal pressure:
PN 16
sleeves:
EPDM
material:
stainless steel 1.4541
Axial expansion joint DN40, sleeve and bellow made of stainless steel 1.4541 / SS 321 flange acc. DIN EN 1092-1 PN 10/16
diameter:
DN40
connection:
flange acc. DIN EN 1092-1
nominal pressure:
PN 10/16
sleeves:
stainless steel 1.4541 / SS 321
material:
steel 1.0037 St 37.2
Compensators DN25 with EPDM-sleeve and stainless steel flange with DVGW drinking water authorization for liquid media and gases (no steam) and drinking water
diameter:
DN25
connection:
flange acc. DIN EN 1092-1 PN40
nominal pressure:
PN 16
sleeves:
EPDM
material:
stainless steel 1.4571
Rubber expansion joint DN200 vacuum support ring for liquid & gaseous media (no steam) with steel flanges & NBR seal
diameter:
DN200
connection:
flange acc. DIN EN 1092-1 PN10
nominal pressure:
PN 10
sleeves:
NBR
material:
steel (electro galvanized) 235JR
There for you
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com
Quality
Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.
This is NieRuf
Committed
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
Motivated
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Competently
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
Flexible
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.